+ 1-888-652-8714 Fix the Routerlogin.Net not working problem of your router |


The message “routerlogin.net is not working” will appear if you enter the wrong IP address. In most routers, the default gateway is IP But the IP address may vary depending on the type of router.

Incorrect credentials can conflict with the router’s IP address. So if you can’t use the bone, we recommend that you move on to the next section. Here we provide some possible methods to eliminate the connection not working error immediately.

Possible ways to fix “routerlogin.net not working

In this section, we provide a set of solutions to fix the “route connection not working error”. All you need to do is use the mentioned methods to fix and connect with the router.

Method 1: Check the important factors

To get back to the bone connection, you need to check some information. If you have incorrectly installed the router, it will limit you to logging into the router. It is therefore recommended to look for the criteria below:

First of all, you need to check the Router Power Led. If you see the light blinking or showing a red or off signal instead of green, there is a problem with the bone.

If the LED is constantly blinking, then you will need to level the bone fixation.

Whether you notice a red LED light or not, it indicates that the problem is with the internet connection.

Note: However, all LEDs are on, this indicates that Netgear routers are receiving sufficient network signal from the ISP. So, to fix the problem and get to the route login page, you need to follow some simple steps:

First, make sure the Ethernet cable is also connected to the router, modem, and computer. Check that the cables of the devices are correctly connected.

Note: If any of these cables is faulty, we recommend that you modify the wires to avoid another fault.

Make sure you entered the correct router IP address.

Also, don’t forget to verify username and password when you open routerlogion.net.

Still can’t get to the router’s login page or get the “routerlogin.net is not working” message? Then we recommend that you follow the steps below to resolve the issue.

You can run any malicious software to make your device virus free. Malware can infect the ability to authenticate with router.net.

Try to log in from another browser to see if the problem is with the browser.

And finally, you can proceed to reset the router to factory default settings.

Method 2: turn off the proxy server

If you still cannot access the router’s login page and routerlogin.net does not work, you need to check the proxy server and then disable it. To change the proxy server settings, you need to follow the steps below:

Open your computer, then scroll to the Home screen.

From there, find the “Internet Access” section and tap on it.

You will get the “Network and Sharing Center”.

Then press “Internet Options”, then search for “Proxy Enabled”.

Go to the option “VPN or proxy server” and right click on it.

From the drop-down menu, choose the “Disable” option.

Sometimes, you may receive pop-up blocking and security messages. So in such cases, you will not be able to get the router’s login page.

To stop receiving messages, you must open your web browser, then go to the “Tools” tab. Choose “Disable pop-up lock options.”

Method 3: Clear DNS Cache

Removing DNS helps users improve network performance. Therefore, we recommend that you remove the DNS to return to the Internet connection in the router.

This allows you to log into your device. But, depending on the operating system, the removal process may vary.

How to remove DNS cache from Windows operating system to fix the problem routerlogin.net It does not work?

To remove DNS you need to apply 3 simple steps in Windows operating system.

First, hit the start button and then go to the search box.

In the search box, type “Run”. Press the Enter button next to the Run dialog box.

When the Run dialog box appears on the screen, type “cmd”. Click the “OK” button and the command prompt window will appear.

In the Command Prompt window, type the command “Break DNS”.

Press the “Enter” button again,

If you have applied the above method in the exact order, you will be able to clear the DNS cache.

Mac OS X operating system

If you are a Mac OS X user, you need to follow these steps to clear DNS cache:

Go to the home screen and go to the Apps section.

Tap on it and select the “Utilities” option.

Right next to it, tap on the “Terminal” option.

From there, select the “Command Prompt” option.

When the command prompt window appears on the screen, write “DNS flush” in it.

Press the “Enter” key to execute the command.

After clearing the DNS cache, you will be able to fix the router connection that is not working. And, if you want to clear the internal DNS cache, you need to check the steps mentioned below:

Google Chrome has a separate internal DNS cache. It will be loaded with the searched item. It is high time to clear the cache. And the added DNS cache can create problems accessing Chrome.

Therefore, you will not be able to access the router’s login page. To clear DNS cache in Chrome, you need to follow the steps mentioned below:

Open the Google Chrome browser. Go to the address bar and write “chrome: // net-internals / # dns: in it.

You will see a list of hosts in Chrome’s internal DNS cache. Tap the “Clear Host Cache” option.

Open the address bar again, then write “chrome: // net-internals / # sockets”.

A window will appear on the screen, option “Close idle socket” from there.

Tap the “Flush Socket Pools” option to clear the browser cache.

Now you will be able to go to the router’s login page and if you still cannot, when the login page will appear on the screen. There you have to write “”. Enter the correct username and password for connecting to the router.

Then go to the “Maintenance” tab and tap on the “set password” option. Write down the password you just set and the existing password. Click the “Apply” button to save the current password.


Previous Rainbow Six Siege New Season Release Time, Server Downtime, Operator Thorn Patch Notes | Games | Entertainment
Next Socionext joins the OnGo alliance to expand the use of CBRS